[1]章 诚,史安康,曹 峥,等.石蜡接枝马来酸酐对碳化钨粉末注射成形专用料性能的影响[J].常州大学学报(自然科学版),2018,30(05):17-22,41.[doi:10.3969/j.issn.2095-0411.2018.05.003]
 ZHANG Cheng,SHI Ankang,CAO Zheng,et al.Effect of Maleic Anhydride on Performance of Paraffin Based Tungsten Carbide Powder Injection Molding Special Materials[J].Journal of Changzhou University(Natural Science Edition),2018,30(05):17-22,41.[doi:10.3969/j.issn.2095-0411.2018.05.003]
点击复制

石蜡接枝马来酸酐对碳化钨粉末注射成形专用料性能的影响()
分享到:

常州大学学报(自然科学版)[ISSN:2095-0411/CN:32-1822/N]

卷:
30
期数:
2018年05期
页码:
17-22,41
栏目:
材料科学与工程
出版日期:
2018-09-28

文章信息/Info

Title:
Effect of Maleic Anhydride on Performance of Paraffin Based Tungsten Carbide Powder Injection Molding Special Materials
作者:
章 诚史安康曹 峥吴 盾
常州大学 材料科学与工程学院,江苏 常州 213164
Author(s):
ZHANG Cheng SHI Ankang CAO Zheng WU Dun
School of Materials Science and Engineering, Changzhou University, Changzhou 213164, China
关键词:
石蜡 马来酸酐 复数黏度 热脱脂 碳化钨
Keywords:
paraffin maleic anhydride complex viscosity thermal degreasing tungsten carbide
分类号:
TF 124.39
DOI:
10.3969/j.issn.2095-0411.2018.05.003
文献标志码:
A
摘要:
通过熔融法制备石蜡(PW)接枝马来酸酐(MAH)的共聚物,并分别用石蜡与石蜡接枝马来酸酐(PW-g-MAH)作为粘结剂制备碳化钨(WC)粉末注射成形专用料。利用红外光谱仪、旋转流变仪、热重分析仪等研究了MAH的引入对专用料性能的影响。结果表明:马来酸酐成功接枝到石蜡上; PW-g-MAH制备的专用料弯曲强度远高于PW制备的专用料强度,但MAH的引入并不影响专用料的复数黏度; MAH的引入提高了专用料在中温区的活化能,因此设计碳化钨粉末注射成形专用料的一步热脱脂工艺时,要适当延长PW-g-MAH制备的专用料在中温区脱脂的升温速率和保温时间。
Abstract:
Paraffin(PW)grafted maleic anhydride(MAH)was prepared by melt method. MAH grafted with PW and pureparaffin were used to prepare tungsten carbide(WC)powder injection molding compound, respectively. The properties of special materials prepared from paraffin and paraffin grafted maleic anhydride were studied by infrared spectroscopy, rotational rheometer and thermogravimetric analyzer, respectively. The results showed that maleic anhydride was successfully grafted onto paraffin wax. The powder loading of special material for the injection molding of tungsten carbide powder was 57%. The bending strength of the special material prepared by paraffin wax grafted MAH was much higher than that of paraffin wax. However, compared with paraffin, PW grafted with MAH did not affect the complex viscosity of specialty materials. Compared with the special material prepared from paraffin, the PW grafted with MAH increased the activation energy of the special material in the mid-temperature zone. Therefore, when designing an one-step hot degreasing process for the injection molding of tungsten carbide powder, degreasing heating rate and holding time in the medium temperature zone should be properly extended.

参考文献/References:


[1] 骆接文,陈强,蔡一湘.粉末微注射技术的研究现状及其在钛合金零件制备领域的应用[J].中国有色金属学报,2010,22(6):10-11.
[2]LI Y,WANG X,HAN Y.Technique of debinding wax-based binder for powder injection molding[J].Materials Science and Engineering of Powder Metallurgy,2011,16(1):150-154.
[3]PIOTTER V,BAUER W, KNITTER R.Powder injection moulding of metallic and ceramic micro parts[J].Microsystem Technologies,2011,17(2):251-263.
[4]贺毅强,陈振华,陈志钢.金属粉末注射成形的原理与发展趋势[J].材料科学与工程学报,2013,2(1):34.
[5]LI Z,GUO S Y,SONG W T,et al. Effect of interfacial interaction on morphology and mechanical properties of PP/POE/BaSO4 ternary composites[J].Journal of Materials Science,2003,38(8):1793-2923.
[6]LIM S H,DASARI A,YU Z Z,et al. Fracture toughness of nylon 6/organoclay/elastomer nanocomposites[J].Composites Science and Technology,2007,67(14):2914-2923.
[7]罗铁钢,曲选辉,秦明礼. 注射成形Kovar合金蜡基粘结剂的优化[J].矿业研究与开发,2005,25(1):37-40.
[8]QU X H,GAO J X,QIN M L,et al. Application of a wax-based binder in PIM of WC-TiC-Co cemented carbides[J].International Journal of Refractory Metals and Hard Materials,2005,23(4/5/6):273-277.
[9]FAN P,FANG Z,GUO J.A review of liquid phase migration and methods for fabrication of functionally graded cemented tungsten carbide[J].International Journal of Refractory Metals and Hard Materials Hard Mater,2013,36(1):2-9.
[10]余永明,胡萍,黄樟华,等.石蜡接枝马来酸酐的研究[J].武汉理工大学学报,2016,38(11):26-32.

相似文献/References:

[1]薛 白,杨基和.石蜡改性———纯氧法合成巴西棕榈蜡替代品[J].常州大学学报(自然科学版),2009,(04):33.
 XUE Bai,YANG Ji -he.Modified Paraffin Wax ———Synthesis of Carnauba Wax Substitute by Oxidizing with Pure Oxygen[J].Journal of Changzhou University(Natural Science Edition),2009,(05):33.
[2]丁永红,俞 强,陈学竞.石蜡/ 交联聚乙烯高分子固- 固相变贮能材料的制备[J].常州大学学报(自然科学版),2007,(04):13.
 DIN G Yong - hong,YU Qiang,CHEN Xue - jin.Preparation of Paraff in/ Crosslinking PE Solid - Sol id Phase Change Material[J].Journal of Changzhou University(Natural Science Edition),2007,(05):13.
[3]徐建平,龚方红.HIPS- g- MA 的制备及其对 HIPS/ PA- 6 共混体系的增容作用[J].常州大学学报(自然科学版),2004,(02):14.
 XU Jian- ping,GONG Fang- hong.Preparation of the HIPS/ MA Graft Copolymer and its Role as a Compatibilizer in HIPS/ PA6 Blends[J].Journal of Changzhou University(Natural Science Edition),2004,(05):14.

备注/Memo

备注/Memo:
收稿日期:2018-04-12。
作者简介:章诚(1977—),男,江苏常州人,实验员。通信联系人:吴盾(1984—),E-mail: wudun@cczu.edu.cn
更新日期/Last Update: 2018-09-28