[1]袁惠新,王赟冰,付双成,等.齿的倾角对齿盘空化器的性能影响[J].常州大学学报(自然科学版),2020,32(02):45-52.[doi:10.3969/j.issn.2095-0411.2020.02.006]
　YUAN Huixin,WANG Yunbing,FU Shuangcheng,et al.Effect of Inclination of Teeth on Performance of Disk Cavitation Device[J].Journal of Changzhou University(Natural Science Edition),2020,32(02):45-52.[doi:10.3969/j.issn.2095-0411.2020.02.006]
点击复制

齿的倾角对齿盘空化器的性能影响()
分享到：

常州大学学报(自然科学版)[ISSN:2095-0411/CN:32-1822/N]

卷:
第32卷
期数:
2020年02期
页码:
45-52
栏目:
机械制造及其自动化
出版日期:
2020-03-28

文章信息/Info

Title:
Effect of Inclination of Teeth on Performance of Disk Cavitation Device
文章编号:
2095-0411(2020)02-0045-08
作者:
袁惠新; 王赟冰; 付双成; 周龙远; 张宇恒;  吴敏浩
(常州大学 机械工程学院,江苏 常州 213164; 常州大学 江苏省绿色过程装备重点实验室,江苏 常州 213164)
Author(s):
YUAN Huixin;  WANG Yunbing;  FU Shuangcheng;  ZHOU Longyuan;  ZHANG Yuheng;  WU Minhao
(School of Mechanical Engineering, Changzhou University, Changzhou 213164, China; Jiangsu Key Laboratory of Green Process Equipment, Changzhou University, Changzhou 213164, China)
关键词:
齿盘剪切空化器;  空化特性;  数值模拟
Keywords:
shearing cavitation device with toothed discs;  the angle of tooth cavitation characteristics;  numerical simulation
分类号:
TK 8
DOI:
10.3969/j.issn.2095-0411.2020.02.006
文献标志码:
A
摘要:
齿盘剪切空化器内的流场及空化过程复杂,齿间的空化行为及空化特性研究一直是该领域的难点和重点。采用Zwart空化模型对齿盘剪切空化器内空化过程进行数值模拟。结果显示,动齿后缘局部区域的空化现象是离心力与机械剪切力的交替作用的结果。齿倾角对齿间空化效果的影响较大,且改变空化泡产生位置。齿盘剪切空化器内的空化在整个盘间呈多点分布,且分布均匀,空化强度高,累积空化体积大。高速旋转的齿盘间“点阵式”空化泡的产生具有连续、稳定特性,这对人们就齿盘剪切空化机理的探索、开发设计和应用具有重要意义。
Abstract:
The flow field and cavitation process in the shearing cavitation device with toothed discs is complex. Cavitation behavior and cavitation characteristics in the intertooth have always been the key problem in the field. The Zwart cavitation model is used to simulate the cavitation flow field in gear zone in a multi-layer rotor-stator gear shearing disc. It is concluded that the cavitation phenomenon in the local region of the trailing edge of the rotoring tooth is the result of the alternating action of the centrifugal force and the mechanical shearing force. The angle of tooth inclination has great influence on the cavitation effect between teeth and changes the position of cavitation bubble. The cavitation in the tooth disc shearing cavitator is distributed in multiple points, and the distribution is uniform, the cavitation intensity is high, and the cumulative cavitation volume fraction is large. The area occupation ratio of the corresponding cavitation bubble varies with a sinusoidal curve with the change of the rotation time of the shearing discs. The “dot matrix” cavitation bubble between the teeth of high speed rotation has the characteristics of continuity and stability. It is of great significance to the exploration, development, design and application of the shearing cavitation mechanism of toothed disks.

参考文献/References:

[1]GOGATE P R. Cavitation: an auxiliary technique in wastewater treatment schemes[J]. Advances in Environmental Research, 2002, 6(3): 335-358.
[2]DEGLON D A, O'CONNOR C T, PANDIT A B. Efficacy of a spinning disc as a bubble break-up device[J]. Chemical Engineering Science, 1998, 53(1): 59-70.
[3]TSENG C C, WANG L J. Investigations of empirical coefficients of cavitation and turbulence model through steady and unsteady turbulent cavitating flows[J]. Computers & Fluids, 2014, 103: 262-274.
[4]黄彪, 王国玉, 张博, 等. 空化模型在非定常空化流动计算的应用评价与分析[J]. 船舶力学, 2011, 15(11): 1195-1202.
[5]MORGUT M, NOBILE E, BILU I. Comparison of mass transfer models for the numerical prediction of sheet cavitation around a hydrofoil[J]. International Journal of Multiphase Flow, 2011, 37(6): 620-626.
[6]KARIM M M, AHMMED M S. Numerical study of periodic cavitating flow around NACA0012 hydrofoil[J]. Ocean Engineering, 2012, 55: 81-87.
[7]VALLIER A, NILSSON H, REVSTEDT J. Mass transfer cavitation model with variable density of nuclei[C]//7th International Conference on Multiphase Flow. Tampa: [s.n.], 2010.
[8]林兴华, 张敏革, 秦青, 等. 空化射流流场数值模拟的研究进展[J]. 化工进展, 2015, 34(4): 921-929.
[9]ZWART P, GERBER A G, BELAMRI T. A two-phase model for predicting cavitation dynamics[C]//Proceedings of ICMF 2004 International Conference on Multiphase Flow. Yokohama: [s.n.], 2004: 1-11.
[10]SCHNERR G H, SAUER J. Physical and numerical modeling of unsteady cavitation dynamics[C]//Proceedings of ICMF 2001 International Conference on Multiphase Flow. New Orleans: [s.n.], 2001: 1-8.
[11]SENOCAK I, SHYY W. A pressure-based method for turbulent cavitating flow computations[J]. Journal of Computational Physics, 2002, 176(2): 363-383.
[12]何志霞, 陈驭航, 纪长浩. 多孔孔板水力空化可视化与数值模拟[J]. 农业机械学报, 2016, 47(2): 396-401.
[13]张德胜, 石磊, 陈健, 等. 轴流泵叶顶泄漏涡及其空化的数值模拟与可视化试验[J]. 水动力学研究与进展(A辑), 2017, 32(5): 565-574.
[14]陈银银, 李育敏, 高海燕, 等. 空化设备的研究进展[J]. 化工时刊, 2013, 27(11): 27-31.

备注/Memo

备注/Memo:
收稿日期:2019-11-29。
作者简介:袁惠新(1957—),男,江苏无锡人,博士,教授。E-mail: yuanhuixin2000@126.com
更新日期/Last Update: 2020-04-28