[1]刘佳,杨基和.薄钢板冷轧轧制油预乳液的研究[J].常州大学学报(自然科学版),2011,(04):23-27.
　LIU Jia,YANG Ji-he.Study of Sheet Steel Cold Rolling Pre-Emulsion Oil[J].Journal of Changzhou University(Natural Science Edition),2011,(04):23-27.
点击复制

薄钢板冷轧轧制油预乳液的研究()
分享到：

常州大学学报(自然科学版)[ISSN:2095-0411/CN:32-1822/N]

卷:
期数:
2011年04期
页码:
23-27
栏目:
出版日期:
2011-09-30

文章信息/Info

Title:
Study of Sheet Steel Cold Rolling Pre-Emulsion Oil
作者:
刘佳;  杨基和
常州大学 江苏省精细石油化工重点实验室，江苏 常州 213164
Author(s):
LIU Jia; YANG Ji-he
Jiangsu Key Laboratory of Fine Petrochemical，Changzhou University, Changzhou 213164, China
关键词:
薄钢板; 冷轧油; 母油; 预乳液
Keywords:
steel sheet; cold rolling oil;  mother oil; pre-emulsion
分类号:
TE 626.3
文献标志码:
A
摘要:
　在薄钢板冷轧过程中，轧制油的润滑性、退火清净性、冷却性、离水展着性是至关重要的。选择世界一流的奎克公司冷轧轧制油为母油参考指标，以我国现行行业标准为乳液依据，进行预乳液轧制油的研究。首先进行基础油筛选，并对其油性、极压抗磨性、酸性等性能改进；在此基础上进行预乳液研制，着重考察其离水展着等性能。实验证明：以菜籽油为基础油，添加24%左右的高粘物质、17%含硫极压抗磨剂、1.3%酸性剂、11%复合乳化剂和3%的消泡剂，所得母油性能完全达到奎克公司薄钢板冷轧油标准，预乳液符合行业使用标准；其5%的乳化液静置24h后析皂量为43mL、2%乳化液静置7〖KG3x〗min后泡沫完全消除；以热重分析模拟退火环境，其油品残留量几乎为0。最终产品符合薄钢板冷轧水基液使用要求。
Abstract:
Developing cold rolling steel sheet pre-emulsion oil in the process of producing cold-rolled sheet, the properties of rolling oil, such as lubrication, cooling , plate-out and anneal free of annoyance, are essential. This study selected a world-class cold rolling oil of Quaker as benchmark for the mother oil, using our current industry standard for the research on pre-emulsion rolling oil.The base oil was selected first,its performance of oil, extreme pressure, anti-wear and acidity were improved. On the basis of the above, the study focused on the development of plate-out. The experiments proved that: using the rapeseed oil as base oil, adding about 24% of the high viscosity material, 17% sulfur extreme pressure and anti-wear agent, 13% acidic agent, 11% complex emulsifier and 3% of antifoaming agents, the properties of oil reach benchmark of cold rolling oil from Quaker, pre-emulsion oil reaching industry standard. After 24h, 5% emulsion oil separating soap volume is 43〖KG3x〗mL. 2% emulsion oil the bubbles are completely eliminated in 7〖KG3x〗min. Using method of thermogravimetric analysis simulating annealing environment, the oil residue is nearly zero. Final products meet requirements of water-based cold-rolled sheet fluid.

参考文献/References:

[1] 陆承东,罗运柏.钢板轧制润滑剂［J］.润滑与密封，2004(4)：64-66.
[2］水天德,张景河,余志英,等.现代润滑油生产工艺［M］.北京：中国石化出版社，1997.
[3］梁治齐.润滑剂生产及应用［M］.北京：化学工业出版社，2000.
[4］秦鹤年，罗宇.冷轧钢板轧制乳化液的研制［J］.润滑与密封，2009，34（8）：79-83.
[5］秦鹤年.乳化型轧制液的质量标准研究与制定［J］.润滑油,2003(3):50-54.
[6］王士庭,孙建林,赵永涛,等.板带钢冷轧乳化液稳定性与润滑性研究［J］.石油炼制与化工，2010, 41(4)：58-62.
[7］周耀华,张广林.金属加工润滑剂［M］.北京：中国石化出版社，2010.
[8］张康夫,王余高,屠伟刚,等.水基金属加工液［M］.北京:化学工业出版社，2007.
[9］琚正川,涂劲松,张志东.热重分析评价铜轧制油的退火清净性［J］.合成润滑材料，2007, 34(2)：17-19.

备注/Memo

备注/Memo:
作者简介：刘佳（1986—），男，江苏南京人，硕士生；通讯联系人：杨基和。
更新日期/Last Update: 2011-09-30