[1]许燕丽,徐伟龙,李金华.集成电路互联金属的电迁移效应研究[J].常州大学学报(自然科学版),2011,(04):71-74.
 XU Yan-li,XU Wei-long,LI Jin-hua.An Investigation of Metal Electromigration in Integrated Circuit Interconnect[J].Journal of Changzhou University(Natural Science Edition),2011,(04):71-74.
点击复制

集成电路互联金属的电迁移效应研究()
分享到:

常州大学学报(自然科学版)[ISSN:2095-0411/CN:32-1822/N]

卷:
期数:
2011年04期
页码:
71-74
栏目:
出版日期:
2011-09-30

文章信息/Info

Title:
 An Investigation of Metal Electromigration in Integrated Circuit Interconnect
作者:
许燕丽徐伟龙李金华
常州大学 数理学院,江苏 常州 213164
Author(s):
XU Yan-liXU Wei-longLI Jin-hua
School of Mathematics and Physics, Changzhou University, Changzhou 213164, China
关键词:
集成电路电迁移互联离子束溅射
Keywords:
integrated circuit interconnect electro-migration ion beam sputtering
分类号:
TN 43;TN 47
文献标志码:
A
摘要:
电迁移效应是因传导电子动量对金属的轰击作用造成金属互连线原子迁移、堆积、断裂的现象,是集成电路损坏的重要原因。本课题用离子束溅射,在介质层上沉积Al,Al-Cu和Cu薄膜,然后对三种薄膜材料进行光刻,得到所需的线条。对经光刻后的各种材质线条通以不同的电流密度,观察电迁移发生的极限电流密度,实验测得Al的极限电流密度为2.706×10.5A/cm.2,含10%Cu的Al-Cu合金的极限电流密度为1.331×10.6A/cm.2,通以Al线条45倍电流密度下,Cu没有观察到电迁移现象。由此可以得出结论,Cu有着很好的抗电迁移性能,在Al中掺入10%左右的Cu可以有效的提高其抗电迁移的能力。
Abstract:
Electro-migration is an atomic transport process which results from momentum transfer to the constituent metal atoms due to collisions with the current conduction electrons. As atoms electro-migrate, there is a depletion of material “upstream” and an accumulation “downstream” at sites of flux divergence. Electro-migration is the main reliability issue in modern integrated circuits. This study uses ion beam sputtering to deposit Al, Al-Cu and Cu film on medium layers. The method of lithography to get the required lines of the three film materials was used. Different current density was applied to the three lines to observe the limit current density when the electro-migration occurs. The limit current density of Al is 2706×105A/cm 2 , Al-Cu was 1.331×106 A/cm 2 . As to Cu, The electro-migration effect was mot observed until the current density was more than 45 times of Al limit current density. Conclusively, Cu has the best anti-electro-migration ability, the Al-Cu alloy containing 10% of Cu could better anti- electro-migration effect

参考文献/References:

[1] 吴顺风,张金松,吴懿平,等.集成电路互连引线电迁移的研究进展[J].半导体技术,2004,29(9):15-21.
[2]陈智涛,李瑞伟.集成电路片内铜互连技术的发展[J].微电子学,2001,31(4):239-241.
[3] Blech I A .Electromigration in thin aluminum films on titanium itride[J]. J Appl Phys,1976,47(1):2 038-2 082.
[4] Gignac H L ,Rosenberg R R .Electromigration of Cu/low dielectric constant interconnects[J].Microelectronics Reliability,2006,46:213-231.
[5]Ma Q ,Suo Z .Precipitate drifting and coarsending caused by Electro-migarion[J].J Appl Phys,1993, 74 (9):5 457-5 462.
[6]Korhonen M A ,B lack R D ,L i C Y , Stress relaxation of passivated aluminum line metallizations on silicon substrates[J].J Appl Phys,1991,(69):1 748-1 749.
[7]Roya A , Kumarb R . Effect of test condition and stress free temperature on the electromigration failure of Cu dual damascene submicron interconnect line-via test structures[J]. Microelectronics Reliability,2005,45:1 443-1 448.
[8]张文杰 ,易万兵 ,吴瑾 .铝互连线的电迁移问题及超深亚微米技术下的挑战[J].物理学报, 2006, 55(10):1 211-1 215.
[9]LIU X Y ,LIU C L ,BORUCKI L J . “A new inverstigation of copper’s role in enhancing Al-Cu interconnect electromigration resistance from an atomistic view[J].Acta mater,1999,47(11):3 227-3 231.
[10]刘琳 ,刘静 .铜互连电迁移失效的研究与进展[J] .微电子器件与技术,2007 (4):211-217.
[11]Molina-Aldareguia J M ,Ocana I .Adhesion studies in integrated circuit interconnect structures[J]. Engineering Failure Analysis,2007(14) :349-354

备注/Memo

备注/Memo:
作者简介:许燕丽(1986-),女, 山东菏泽人,硕士;通讯联系人:李金华。
更新日期/Last Update: 2011-09-30