参考文献/References:
[1]栾振辉.齿轮泵研究的现状与发展[J].起重运输机械,2005(6):11-13.
[2]王铖龙,祝海林,蒋宇,等.谐波式齿轮泵齿轮啮合齿廓型式的选择[J].常州大学学报:自然科学版,2012,24(3):26-29.
[3]阳培,张立勇,王长路,等.谐波齿轮传动技术发展概述[J].机械传动,2005(3):69-72.
[4]罗骥,吴盛林,袁子荣,等.内啮合齿轮泵内部泄漏流量的建模与实验[J].机床与液压,2005(8):106-107.
[5]张利平.液压气动技术速查手册[M].北京:化学工业出版社,2007.
[6]姜继海,宋锦春,高常识.液压与气压传动[M].北京:高等教育出版社,2002.
相似文献/References:
[1]宁 鹏,祝海林,钱志达,等.波发生器外置谐波式齿轮泵轮齿表面耐磨分析[J].常州大学学报(自然科学版),2014,(02):58.[doi:10.3969/j.issn.2095-0411.2014.02.014]
NING Peng,ZHU Hai-lin,QIAN Zhi-da,et al.The Wear Analysis of the Working Surface of Gear Tooth in
Harmonic Gear Pump with External Wave Generator[J].Journal of Changzhou University(Natural Science Edition),2014,(01):58.[doi:10.3969/j.issn.2095-0411.2014.02.014]
[2]秦兴培,祝海林,黄 涛,等.外波发生器谐波式齿轮泵齿轮的参数化设计[J].常州大学学报(自然科学版),2014,(01):66.[doi:10.3969/j.issn.2095-0411.2014.01.015]
QIN Xing-pei,ZHU Hai-lin,HUANG Tao,et al.Parametric Design of Gear in Harmonic Gear Pump withExternal Wave Generator[J].Journal of Changzhou University(Natural Science Edition),2014,(01):66.[doi:10.3969/j.issn.2095-0411.2014.01.015]
[3]王铖龙,祝海林,蒋 宇,等.谐波式齿轮泵齿轮啮合齿廓型式的选择[J].常州大学学报(自然科学版),2012,(03):26.
WANG Cheng-long,ZHU Hai-lin,JIANG Yu,et al.Harmonic Gear Pump Gear Meshing Tooth Profile Type Selection[J].Journal of Changzhou University(Natural Science Edition),2012,(01):26.
[4]李佑武,邹 旻,祝海林,等.渐开线谐波式齿轮泵排量计算[J].常州大学学报(自然科学版),2015,(01):21.[doi:10.3969/j.issn.2095-0411.2015.01.004]
LI You-wu,ZOU Min,ZHU Hai-lin,et al.Displacement Calculation of Involute Tooth Harmonic Gear Pump[J].Journal of Changzhou University(Natural Science Edition),2015,(01):21.[doi:10.3969/j.issn.2095-0411.2015.01.004]