[1]王辉,陈晓龙,童涵.激光诱导Fe 基TiN 强化复合层形成温度场模拟[J].常州大学学报(自然科学版),2015,(03):29-34.[doi:10.3969/j.issn.2095-0411.2015.03.006]
　WANG Hui,CHEN Xiaolong,TONG Han.Simulation of Laser-Induced Fe-Matrix TiN Reinforced Composite Layer Forming Temperature Field[J].Journal of Changzhou University(Natural Science Edition),2015,(03):29-34.[doi:10.3969/j.issn.2095-0411.2015.03.006]
点击复制

激光诱导Fe 基TiN 强化复合层形成温度场模拟()
分享到：

常州大学学报(自然科学版)[ISSN:2095-0411/CN:32-1822/N]

卷:
期数:
2015年03期
页码:
29-34
栏目:
出版日期:
2015-07-25

文章信息/Info

Title:
Simulation of Laser-Induced Fe-Matrix TiN Reinforced Composite Layer Forming Temperature Field
作者:
王辉; 陈晓龙; 童涵
常州大学 机械工程学院，江苏 常州 213164
Author(s):
WANG Hui;  CHEN Xiaolong;  TONG Han
School of Mechanical Engineering, Changzhou University, Changzhou 213164, China
关键词:
激光; TiN; 复合层; 温度场; ANSYS
Keywords:
laser;  TiN;  composite layer;  temperature field;  ANSYS
分类号:
TH 16
DOI:
10.3969/j.issn.2095-0411.2015.03.006
文献标志码:
A
摘要:
讨论激光诱导Fe基TiN强化复合层形成的可行性。不同于PVD和CVD及其他衍生方法，TiN是在Fe基样品表层原位复合生成，而非Fe基表面，与激光熔覆和激光合金化不同，Fe基体不经历熔化再凝固的过程。对移动激光光源条件下的温度场进行了模拟，通过分析激光温度场与各影响因素之间的关系来控制参数以获得TiN强化复合层。
Abstract:
The feasibility of Fe-based TiN reinforced composite layer induced by laser was discussed. Unlike PVD and CVD as well as the methods based on deposition, TiN is in-situ composited in the surface layer of Fe-based sample induced by laser, but not deposited on the surface of Fe-based sample. Also, different from laser cladding and laser alloying, Fe substrate does not experience the cycle of melt and resolidification. The temperature field of laser under the condition of moving light source is simulated. The relationship between the laser temperature field and influence factors is analyzed in order to control parameters to achieve the TiN reinforced composite layer.

参考文献/References:

[1]SOROKA E, LYASHENKO B, QIAO SHENGRU, et al. Tribological Behaviour and Cutting Performance of PVD-TiN Coating/Substrate System with Discontinuous Surface Architecture[J]. Rare Metal Materials and Engineering, 2011，40 (4): 580-584.
[2]WAGNER J, MITTERER C, PENOY M, et al. The effect of deposition temperature on microstructure and properties of thermal CVD TiN coatings[J]. International Journal of Refractory Metals and Hard Materials,2008,26 (2): 120-126.
[3]黄艳, 魏仕勇, 蒋庐珍. 物理气相沉积TiN 涂层的研究现状与展望[J]. 江西科学, 2009,27 (3):466-470.
[4]高原, 徐晋勇, 刘燕萍, 等. 碳钢表面氮化钛陶瓷化研究[J]. 材料热处理学报, 2005,26(3): 61-63.
[5]董洪亮, 李国军, 崔学军.高性能陶瓷涂层的制备技术与发展[J].材料导报,2008,22(XI): 183-186.
[6] 叶大伦. 实用无机物热力学手册[M] .北京:冶金工业出版社, 2002, 9.
[7]王毷成,绍敏.有限单元法基本原理与数值方法[M].北京:清华大学出版社,1988:23-60.
[8] SEOP K H, IG H S, JAE K S. On the rule of mixtures for predicting the mechanical properties of composites with homogenously distributed soft and hard particles[J]. Journal of Materials Processing Technology,2001,112(1):109-113.
[9] 关振中.激光加工工艺手册[M].北京:中国计量出版社,1998:28-74.
[10] Simchi, Pohl H r. Sintering processing parameters on the microstructure and densification of iron powder[J]. Materials and Engineering, 2003,359:119-128.
[11]王桂兰,吴圣川,张海鸥,等.复杂零件等离子熔积无模成形的温度场模拟[J].焊接学报,2007,28(5):49-52.
[12] 王强,李冬林.基于ANSYS平台的堆焊热应力的动态模拟[J].武汉理工大学学报(交通科学与工程版),2004,128(6):866-869.

更新日期/Last Update: 2015-11-26