[1]徐燕.三次采油用聚丙烯酰胺类聚合物的研究进展[J].常州大学学报(自然科学版),2015,(04):69-73.[doi:10.3969/j.issn.2095-0411.2015.04.013]
　XU Yan.Research Development of Polyacrylamides Polymer for Enhanced Oil Recovery[J].Journal of Changzhou University(Natural Science Edition),2015,(04):69-73.[doi:10.3969/j.issn.2095-0411.2015.04.013]
点击复制

三次采油用聚丙烯酰胺类聚合物的研究进展()
分享到：

常州大学学报(自然科学版)[ISSN:2095-0411/CN:32-1822/N]

卷:
期数:
2015年04期
页码:
69-73
栏目:
石油与天然气工程
出版日期:
2015-11-15

文章信息/Info

Title:
Research Development of Polyacrylamides Polymer for Enhanced Oil Recovery
作者:
徐燕
国家知识产权局专利局专利审查协作江苏中心,江苏 苏州 215163
Author(s):
XU Yan
Patent Examination Cooperation Jiangsu Center of the Patent Office, SIPO, Suzhou 215163, China
关键词:
三次采油;  驱油;  聚丙烯酰胺
Keywords:
enhanced oil recovery;  oil-displacing;  polyacrylamide
分类号:
TE 135
DOI:
10.3969/j.issn.2095-0411.2015.04.013
文献标志码:
A
摘要:
聚丙烯酰胺类聚合物是三次采油(EOR)中应用最广泛的一类聚合物,从疏水缔合聚合物、耐温抗盐功能单体共聚、梳形聚合物以及多种特殊结构复合聚合物4个角度综述了用于三次采油中的聚丙烯酰胺类聚合物的研究进展。从目前的研究成果来看,对疏水缔合聚合物的研究比较多,但大部分还处于实验室研究阶段,且其面临着诸多问题; 而对于复合聚合物,由于引入功能单体过多,对聚合物本身分子量造成了不利影响,其性能还不能完全达到油田三次采油应用的要求。综合制备与性能来看,功能单体的多元共聚以及梳形聚合物将会是EOR用聚丙烯酰胺类聚合物开发的可行方向。
Abstract:
Polyacrylamides polymer is the most widely used polymer for enhanced oil recovery(EOR).This article reviewed the research development of polyacrylamides polymer for EOR from four perspectives,which were hydrophobic associating polymer,heat-resistant anti-salt copolymers, comb polymer,and a variety of special structural composite polymers. According to the research results, the research of hydrophobic associating polymer is abundant, most of which is still in the laboratory research stage, facing many problems; For special structural composite polymer, the introduction of functional monomers plays the adverse effects on the molecular weight, and the properties can not fully meet the needs of EOR applications. Considering the preparation and performance, the feasible ways for EOR polyacrylamide are the copolymerization of acrylamide and multi-functional monomers and preparation of comb polymers.

参考文献/References:

[1] TAYLOR K C, NASR-EL-DIN H A. Water-soluble hydrophobically associating polymers for improved oil recovery: A literature review [J].Journal of Petroleum Science and Engineering, 1998, 19(3-4):265-280.
[2]BASF S E. Hydrophobically associating copolymers:US2010/0331510 [P]. 2010-12-30.
[3]MCCORMICK C L, NONAKA T, JOHNSION C B. Water-soluble copolymers: synthesis and aqueous-solution behavior of associative acrylamide N-alkylacrylamide copolymers[J].Polymer, 1988, 29:731-739.
[4]杨化彪. 季铵型疏水缔合聚丙烯酰胺的合成及性质研究[D]. 济南:山东大学,2012.
[5]邓全花,李海平,曹旭龙,等. 高盐条件下烷醇酰胺与疏水缔合聚丙烯酰胺的加和增效机制研究[C]//中国化学会第29届学术年会摘要集-第26分会:胶体与界面. 北京:[出版者不详],2014: 124.
[6]龚雪梅. 含氟疏水缔合聚丙烯酰胺的制备及溶液性质研究[D]. 西安:陕西科技大学,2014.
[7]Sanyo Chemical Industries Ltd. Water-soluble copolymers useful for enhanced oil recovery: US 4563290[P]. 1986-01-07.
[8]BREMER C, CHRISTIAN I, OBERMUELLER A. Polymer dispersions, process for their preparation and use: WO2007059857[P]. 2007-05-31.
[9]The Goodyear Tire & Rubber Company. Injection water viscosifier for enhanced oil recovery: US, 4736005[P]. 1988-04-05.
[10]顾民, 吕静兰, 李伟, 等. 甲基丙烯磺酸钠-N, N-二甲基丙烯酞胺-丙烯酞胺耐温抗盐共聚物的合成[J].石油化工, 2005, 34(5): 437-440.
[11]Atlantic Richfield Company. N,N-Dimethylacrylamide/2-acrylamido-2-methylpropane sulfonic acid copolymers for enhanced petroleum recovery: US4404111[P]. 1983-09-13.
[12]廖礼, 李建波, 张菀乔, 等. 耐温抗盐驱油剂——新型三元共聚物的合成与研究[J].天津化工, 2006, 20(4): 29-30, 35.
[13]DUECK J K T, ACHARYA H R, HUANG Q, et al. Method for purifying aqueous stream, system and process for oil recovery and process for recycling polymer flood: WO2012136064[P]. 2012-10-11.
[14]杨雪, 王江红, 卢琼. 驱油用磺化聚丙烯酰胺的制备及溶液性能研究[J].日用化学工业, 2014, 44(7): 375-378.
[15]中国石油化工股份有限公司,中国石油化工股份有限公司北京化工研究院. 一种含脂肪叔胺基团的大分子及其制法和在驱油剂中应用:102050917[P]. 2011-05-11.
[16]中国石油化工股份有限公司,中国石油化工股份有限公司北京化工研究院. 一种耐温抗盐接枝型聚丙烯酰胺及其制法:102050913[P]. 2011-05-11.
[17]王玉普, 罗健辉, 若颖, 等. 三次采油用抗温抗盐聚合物分析[J].化工进展, 2003, 22(3): 271-274.
[18]李俊中, 蒲万芬, 杨燕. AM/AMPS/第三单体三元共聚物耐温抗盐驱油体系的合成与性能[J].石油天然气学报(江汉石油学院学报), 2011, 33(3): 128-131.
[19]孙群哲, 宋华, 李锋, 等. 三元驱油用磺化聚丙烯酰胺的合成与性能研究[J].化学工业与工程技术, 2014, 35(3): 41-44.
[20]西南石油大学. 一种水溶性四元共聚物驱油剂及其合成方法:103409125[P]. 2013-11-27.
[21]西南石油大学. AM/NaAA/AMPL三元共聚物驱油剂及合成:103242818[P]. 2013-08-14.
[22]闫立伟, 封明明, 苟绍华, 等. 耐温抗盐AM-AA-SAS-St 四元聚合物驱油剂的合成及性能评价[J].化学研究与应用, 2012, 24(5): 811-815.
[23]石英. 新型聚合物溶解性与注入性关系研究[D]. 北京:中国石油勘探开发研究院,2005.
[24]刘平德, 牛亚斌, 张梅. 驱油用聚合物PF1的合成与性能评价[J].西南石油学院学报, 2005, 27(4): 44-46.
[25]刘平德, 张梅, 雒贵明. 新型聚合物KYP的合成与性能研究[J].大庆石油地质与开发, 2005, 24(2): 92-94.
[26]成都理工大学. 一种烯丙基型表面活性大单体的制备方法:101543747[P]. 2009-09-30.
[27]成都理工大学. 一种4-乙烯基苄基型表面活性大单体的制备方法:101543748[P]. 2009-09-30.
[28]ZHONG C R, LUO P Y, YE Z B, et al. Characterization and solution properties of a novel water-soluble terpolymer for enhanced oil recovery[J].Polymer Bulletin, 2009, 62: 79-89.
[29]Exxon Research and Engineering Company. Enhanced oil recovery with hydrophobically associating polymers containing sulfonate functionality: US4702319[P]. 1987-10-27.
[30]Exxon Research and Engineering Company. Enhanced oil recovery with hydrophobically associating polymers containing N-vinyl-pyrrolidone functionality: US4709759[P]. 1987-12-01.
[31]BASF S E. Method for oil recovery using hydrophobically associating polymers: WO2012069477[P]. 2012-05-31.
[32]BASF S E. Method for oil recovery using hydrophobically associating polymers: WO2012069478[P]. 2012-05-31.
[33]西南石油大学. 水溶性四元共聚物驱油剂及其制备方法: 104099080[P]. 2014-10-15.
[34]西南石油大学. 一种阳离子疏水缔合聚合物驱油剂及其制备方法:102660250[P]. 2012-09-12.

备注/Memo

备注/Memo:
收稿日期:2015-05-05。作者简介:徐燕(1980—),女,辽宁大连人,硕士,五级审查员,主要从事钻井组合物领域实质审查以及PCT审查研究。
更新日期/Last Update: 2015-10-20