[1]李 菊,曾氢菲,沈惠平,等.三平移一转动四维并联振动筛主机构优选[J].常州大学学报(自然科学版),2018,30(05):42-50.[doi:10.3969/j.issn.2095-0411.2018.05.006]
　LI Ju,ZENG Qingfei,SHEN Huiping,et al.Mechanism Optimization of 4-Dimentional Parallel Vibrating Screen with Three Translations and One Rotation[J].Journal of Changzhou University(Natural Science Edition),2018,30(05):42-50.[doi:10.3969/j.issn.2095-0411.2018.05.006]
点击复制

三平移一转动四维并联振动筛主机构优选()
分享到：

常州大学学报(自然科学版)[ISSN:2095-0411/CN:32-1822/N]

卷:
第30卷
期数:
2018年05期
页码:
42-50
栏目:
机械制造及其自动化
出版日期:
2018-09-28

文章信息/Info

Title:
Mechanism Optimization of 4-Dimentional Parallel Vibrating Screen with Three Translations and One Rotation
作者:
李 菊; 曾氢菲; 沈惠平; 邓嘉鸣; 强恒存; 吴 晓
常州大学 现代机构学研究中心,江苏 常州 213164
Author(s):
LI Ju;  ZENG Qingfei;  SHEN Huiping;  DENG Jiaming;  QIANG Hengcun;  WU Xiao
Research Center for Advanced Mechanism Theory, Changzhou University, Changzhou 213164, China
关键词:
并联振动筛;  EDEM;  机构优选;  AHP;  支链布置
Keywords:
parallel vibrating screen;  EDEM;  mechanism optimization;  AHP;  branch layout
分类号:
TH 237.6
DOI:
10.3969/j.issn.2095-0411.2018.05.006
文献标志码:
A
摘要:
为得到理想的三平移一转动四维并联振动筛主机构构型,首先运用EDEM软件,分析得到三平移一转动筛面理想的运动输出:沿筛面长度、宽度和高度方向的移动幅值分别为15,15,6 mm,绕筛面法线方向的转动幅值为6°; 然后选择具有3种不同支链布置方式的并联机构SOC{-R∥R∥R⊥R∥R-} SOC{-R∥R⊥R∥R-}2-SOC{-S-S-}作为四维振动筛主机构,并得到该机构在3种不同支链布置方式下的运动输出幅值; 再根据理想的筛面运动输出幅值与振动筛主机构在3种不同支链布置方式下的筛面运动输出幅值,应用层次分析法(Analytic Hierarchy Processs, AHP)优选出理想的四维并联振动筛主机构构型; 接着运用EDEM软件对四维并联振动筛在3种不同支链布置方式下的物料筛分过程进行了仿真试验验证; 最后研制了四维并联振动筛样机,并在样机上进行了筛分试验验证。本研究为四维并联振动筛的设计和应用提供参考依据。
Abstract:
In order to obtain the optimal configuration of the four degree of freedom parallel mechanism, the output motion of three translational and one rotational mechanism is analyzed based on EDEM software, and the ideal motion parameters of the screen surface are obtained: the amplitude of x,y,z are respectively 15, 15, 6 mm, and the amplitude of γ is 6 degrees; There are three branched different layouts of the main mechanism of parallel vibrating screen, which can be expressed as SOC{-R∥R∥R⊥R∥R-} SOC{-R∥R⊥R∥R-}2-SOC{-S-S-}, the simulation results of the screen surface which are close to the ideal screen surface form are obtained. Then, according to the ideal output motion of the screen surface and the simulation results of the screen surface with three kinds of arrangement modes, the analytic hierarchy process(AHP)is applied to the optimization selection of 4-DOF parallel vibration sieve. Evaluation and the rank of screening efficiency of three kinds of main mechanism are obtained, and the simulation of parallel vibration screening process is verified, finally the prototype is produced. The research of this paper could provide reference for the design and application of 4-dimensional parallel vibrating screen.

参考文献/References:


[1]沈惠平,杨廷力.用于并联运动装备的二自由度空间并联机构:1868689A [P].2006-11-29.
[2]沈惠平,张会芳.一种新型并联筛及其运动学研究与研制[J].机械设计,2007,24(6):34-36.
[3]沈惠平,张会芳,张江涛,等.并联运动振动筛的筛分运动规律及其轨迹的研究[J].机械设计,2008,25(12):20-23.
[4]SHEN H P,XUE C Y,ZHANG J T,et a1.A novel PKM-based vibrating sifter and its screening efficiency experimental study[C]//13th World Congress in Mechanism and Machine Science.Guanajuato:[s.n.],2011:19-25.
[5]林钰珍.基于并联机构的高效多维振动筛设计与研究[D].镇江:江苏大学,2009.
[6]杨晓彬.三维振动筛的设计及透筛过程中颗粒物料运动仿真[D].镇江:江苏大学,2009.
[7]谢俊,张晓庆,王成军.基于三平移并联机构的茶叶筛分试验[J].农业机械学报,2012,43(10):101-104.
[8]王南,周海栋,崔国华,等.基于三转动并联机构的茶叶筛分装置运动学性能研究[J].工程设计学报,2014,21(3):266-272.
[9]王成军.典型农业物料在三维并联振动筛中的筛分理论与试验[D]. 镇江:江苏大学,2012.
[10]李菊,曾氢菲,邓嘉鸣,等.多维并联振动筛筛分过程解析与筛面运动形式优选[J].农业机械学报,2016,47(11):399-407.
[11]胡国明.颗粒系统的离散元素法分析仿真-离散元素法的工业应用与EDEM软件简介[M].武汉:武汉理工大学出版社,2010.
[12]LUN T K,CHANG T H,LIN Y,et al.DEM simulation of a 3D vertical vibratory screening process:the study of a simulated woven-mesh structure[J].Aiche Journal,2011,57(4):918-928.

[13]CHEN Y H,TONG X.Model screening effiency with vibrational parameters based on DEM 3D simulation[J].Mining Science and Technology,2010,20:615-620.
[14]RAHMAN M,SHINOHARA K,ZHU H P,et al.Size segregation mechanism of binary particle mixture in forming a conical pile[J].Chemical Engineering Science,2011,66(23):6089-6098.
[15]沈惠平,邓嘉鸣,李菊,等.少维输入-多维期望运动输出并联机构及其应用[J].机械设计与制造工程, 2013,42(6):1-4.
[16]杨廷力,刘安心,罗玉峰,等.机器人机构拓扑结构设计[M].北京:科学出版社,2012.
[17]SAHOO S,DHAR A,KAR A.Environmental vulnerability assessment using grey analytic hierarchy process based model[J].Environmental Impact Assessment Review,2016,56:145-154.
[18]SAATY T L.Decision making with the analytic hierarchy process[J].International Journal of Services Sciences,2008,1(1):83-98.
[19]党林立,孙晓群.数学建模简明教程[M].西安:西安电子科技大学出版社,2009.
[20]李海平.社会科学项目综合价值分析与软件开发[D].西安:陕西科技大学,2008.

备注/Memo

备注/Memo:
收稿日期:2018-02-17。
基金项目:国家自然科学基金项目(51405039,51375062)。
作者简介:李菊(1981—),女,江苏无锡人,博士,讲师。E-mail: wangjuo209@163.com
更新日期/Last Update: 2018-09-28