[1]王小兵,龚浩宇,李 森,等.空心抽油杆内连续管下入深度对井筒温度分布的影响[J].常州大学学报(自然科学版),2021,33(02):79-87.[doi:10.3969/j.issn.2095-0411.2021.02.011]
 WANG Xiaobing,GONG Haoyu,LI Sen,et al.Influence of the Depth of Continuous Pipe in Hollow Rod on Wellbore Temperature Distribution[J].Journal of Changzhou University(Natural Science Edition),2021,33(02):79-87.[doi:10.3969/j.issn.2095-0411.2021.02.011]
点击复制

空心抽油杆内连续管下入深度对井筒温度分布的影响()
分享到:

常州大学学报(自然科学版)[ISSN:2095-0411/CN:32-1822/N]

卷:
第33卷
期数:
2021年02期
页码:
79-87
栏目:
石油及天然气工程
出版日期:
2021-03-28

文章信息/Info

Title:
Influence of the Depth of Continuous Pipe in Hollow Rod on Wellbore Temperature Distribution
文章编号:
2095-0411(2021)02-0079-09
作者:
王小兵 龚浩宇 李 森 朱晨阳 冯 宸
(常州大学 石油工程学院, 江苏 常州 213164)
Author(s):
WANG Xiaobing GONG Haoyu LI Sen ZHU Chenyang FENG Chen
(School of Petroleum Engineering, Changzhou University, Changzhou 213164, China)
关键词:
稠油 空心抽油杆 热水循环 连续管下入深度 温度分布
Keywords:
heavy oil hollow sucker rod hot water circulation continuous pipe penetration depth temperature distribution
分类号:
TE 355
DOI:
10.3969/j.issn.2095-0411.2021.02.011
文献标志码:
A
摘要:
稠油举升过程中, 由于地温变化造成井筒内温度压力降低, 导致原油黏度增大、 溶解气析出, 最终造成原油结蜡、油井堵塞。空心抽油杆内连续管热水循环加热工艺作为一种经济有效的采油工艺方法, 能有效防止稠油在井筒内结蜡。在满足稠油油井生产要求的前提下, 为了优化连续管下入深度, 减少投资成本, 建立热水循环加热井筒温度场的二维轴对称稳态模型, 选取不同连续管下入深度, 计算井筒温度分布。研究表明连续管不同下入深度对井筒温度具有较大影响; 连续管下深700~1 200 m均可满足防蜡降黏要求; 当连续管下深为700 m时, 循环水出口温度约为60.5 ℃, 产出液出口温度约为59 ℃, 现场应用时可将连续管下深至700 m以最大限度节约成本。
Abstract:
During the lifting process of heavy oil, the temperature and pressure in the wellbore decrease due to the change of ground temperature, resulting in an increase in viscosity and precipitation of dissolved gas, which eventually leads to waxing of oil and blockage of oil wells. As a cost-effective oil recovery process, the continuous hot water circulation heating process in the hollow sucker rod can effectively prevent heavy oil from waxing in the wellbore. Under the premise of meeting the production requirements of heavy oil wells, in order to optimize the penetration depth of the continuous pipe, the investment cost is reduced. A two-dimensional axisymmetric steady-state model of the wellbore heating temperature field is established, and the depth of the different continuous tubes is selected to calculate the temperature distribution in the wellbore.The studies have shown that different penetration depths of continuous tubes have a greater impact on wellbore temperature; the depth of 700—1 200 m under the continuous pipe can meet the requirements of anti-wax and viscosity reduction, and the continuous pipe can be deep down to 700 m to maximize cost savings.

参考文献/References:

[1]刘广天, 单学军. 稠油热采井井筒温度模型研究及应用[J]. 科学技术与工程, 2004, 14(22): 189-192.
[2]陈曦, 蔡亮, 于涛, 等. 高凝油井筒温度分布的影响[J].石油矿场机械, 2015, 44(9): 14-18.
[3]KAVIANY M. Principles of heat transfer[M]. New York: John Wiley & Sons, Inc, 2002.
[4]俞佐平, 陆煜. 传热学[M]. 北京: 高等教育出版社, 1995.
[5]牛彩云, 周志平, 常莉静, 等. 空心杆热洗清蜡工具的改进与应用[J]. 钻采工艺, 2019, 42(1): 106-107.
[6]周赵川, 王辉, 徐明海, 等. 海上采油井筒温度计算及隔热管柱优化设计[J]. 石油机械, 2014, 42(4): 43-48.
[7]马新仿, 王文雄, 张婷, 等. 特、超稠油井井筒蒸汽参数计算[J]. 新疆石油地质, 2007, 28(10): 75-77.
[8]陈德春, 李昂, 姜东, 等. 潜油电泵井油套环空泵上掺稀油井筒流体温度模型[J]. 新疆石油地质,2013, 34(5): 591-594.
[9]夏洪权, 李辉, 刘翔, 等. 稠油拐点温度测算方法研究[J]. 特种油气藏, 2006, 13(6): 49-51.
[10]杨晓. 稠油热采井热流耦合过程研究[D]. 西安: 西安石油大学, 2018.
[11]时光. 稠油热采中井筒加热装置下入深度的研究[D]. 大庆: 东北石油大学, 2014.
[12]陈超峰, 王补信, 付前进, 等. 流体注入过程中井筒温度场计算及影响因素分析[J]. 化工技术与开发, 2017, 46(11): 55-58.
[13]郭平平. 热水循环配套采油工艺在高凝稠油油田的应用[J]. 化学工程与装备, 2009(4): 42-43.
[14]JAKOB M. Heat transfer[M]. New York: John Wiley & Sons, Inc, 1949.

备注/Memo

备注/Memo:
收稿日期:2020-11-21。
基金项目:国家自然科学基金资助项目(51706023)。
作者简介:王小兵(1971—), 男, 江苏扬州人, 博士, 副教授。E-mail: wangxb@cczu.edu.cn
引用本文:王小兵, 龚浩宇, 李森, 等. 空心抽油杆内连续管下入深度对井筒温度分布的影响[J]. 常州大学学报(自然科学版), 2021, 33(2): 79-87.
更新日期/Last Update: 1900-01-01