[1]廖华勇,倪广环,陶国良,等.高密度聚乙烯(HDPE)/尼龙6共混材料动态流变行为[J].常州大学学报(自然科学版),2022,34(03):19-25.[doi:10.3969/j.issn.2095-0411.2022.03.004]
　LIAO Huayong,NI Guanghuan,TAO Guoliang,et al.Dynamic Rheological Behavior of a High Density Polyethylene(HDPE)/Polyamide 6 Blending Melt[J].Journal of Changzhou University(Natural Science Edition),2022,34(03):19-25.[doi:10.3969/j.issn.2095-0411.2022.03.004]
点击复制

高密度聚乙烯(HDPE)/尼龙6共混材料动态流变行为()
分享到：

常州大学学报(自然科学版)[ISSN:2095-0411/CN:32-1822/N]

卷:
第34卷
期数:
2022年03期
页码:
19-25
栏目:
材料科学与工程
出版日期:
2022-05-28

文章信息/Info

Title:
Dynamic Rheological Behavior of a High Density Polyethylene(HDPE)/Polyamide 6 Blending Melt
文章编号:
2095-0411(2022)03-0019-07
作者:
廖华勇; 倪广环; 陶国良; 刘春林
(江苏省环境友好高分子材料重点实验室(常州大学),江苏常州213164;常州大学材料科学与工程学院,江苏常州213164)
Author(s):
LIAO Huayong;  NI Guanghuan;  TAO Guoliang;  LIU Chunlin
(Jiangsu Key Laboratory of Environmentally Friendly Polymeric Materials, Changzhou University, Changzhou 213164, China; School of Materials Science and Engineering, Changzhou University, Changzhou 213164, China)
关键词:
HDPE/HDPE-g-MAH/PA6共混物;  乳液包乳液;  储能模量;  相容剂;  流变行为
Keywords:
HDPE/HDPE-g-MAH/PA6 blends;  emulsion-in-emulsion;  storage modulus;  compatibilizer;  rheological behavior
分类号:
O 373
DOI:
10.3969/j.issn.2095-0411.2022.03.004
文献标志码:
A
摘要:
研究了HDPE/HDPE-g-MAH/PA6共混物的形貌和动态流变特性。扫描电镜显示,HDPE-g-MAH相容剂的添加使得HDPE/PA6共混物的分散相尺寸细化。当共混物中尼龙6(PA6)质量分数分别为14%,34%,56%和78%时,共混物分别显示出海-岛结构(PA6分散相,HDPE基体)、乳液包乳液结构(HDPE基体中PA6熔滴被HDPE-g-MAH包裹)、双连续相结构和海-岛结构(HDPE分散相,PA6基体)。由于这种乳液包乳液结构,DPE/HDPE-g-MAH/PA6共混物黏度超出纯PA6和纯HDPE黏度,其黏度主要由乳液外层HDPE-g-MAH接枝物的黏度决定。共混材料的松弛时间谱大多显示出HDPE和PA6的松弛时间峰,但PA6质量分数为34%时,由于乳液包乳液结构影响,共混材料显示特殊的松弛时间谱。
Abstract:
Morphology and dynamic rheological behavior of HDPE/PA6 blends compatibilized by a high density polyethylene grafted maleic anhydride(HDPE-g-MAH)have been investigated. Scanning electron microscope(SEM)images exhibit the dispersed droplets of HDPE/PA6 blends become small by addition of the compatibilizer HDPE-g-MAH. When the weight content of PA6 is 14%, 34%, 56% and 78%, the HDPE/HDPE-g-MAH/PA6 blends show sea-island morphology(PA6 is dispersed phase and HDPE matrix), emulsion-in-emulsion(PA6 droplets are encapsulated by HDPE-g-MAH in HDPE matrix)morphology, co-continuous and sea-island morphology(HDPE-g-PA6 is dispersed phase and PA6 matrix), respectively. Due to the special emulsion-in-emulsion morphology, HDPE/HDPE-g-MAH/PA6 blends have higher viscosity beyond the range between pure HDPE and PA6. The relaxation time spectrum of most of the blends show peaks of HDPE phase and PA6 phase, respectively, but the blend with 34% PA6 show different relaxation spectrum due to the emulsion-in-emulsion structure.

参考文献/References:

[1]YEE M, SOUZA A M C, VALERA T S, et al. Stress relaxation behavior of PMMA/PS polymer blends[J]. Rheologica Acta, 2009, 48(5): 527-541.
[2]LI L P, YIN B, ZHOU Y, et al. Characterization of PA6/EPDM-g-MA/HDPE ternary blends: the role of core-shell structure[J]. Polymer, 2012, 53(14): 3043-3051.
[3]YIN B, LI L P, ZHOU Y, et al. Largely improved impact toughness of PA6/EPDM-g-MA/HDPE ternary blends: the role of core-shell particles formed in melt processing on preventing micro-crack propagation[J]. Polymer, 2013, 54(7): 1938-1947.
[4]SHEN C, ZHOU Y, DOU R, et al. Effect of the core-forming polymer on phase morphology and mechanical properties of PA6/EPDM-g-MA/HDPE ternary blends[J]. Polymer, 2015, 56: 395-405.
[5]SHI D A, HU G H, KE Z, et al. Relaxation behavior of polymer blends with complex morphologies: palierne emulsion model for uncompatibilized and compatibilized PP/PA6 blends[J]. Polymer, 2006, 47(13): 4659-4666.
[6]金和, 顾有伟, 罗磊. MAH改性PE/PA6共混体系的热致形状记忆功能[J]. 工程塑料应用, 2004, 32(2): 11-13.
[7]袁园, 丁雪佳, 张德强, 等. 双峰聚乙烯/PA6共混体系的结晶行为和力学性能[J]. 塑料工业, 2010, 38(8): 18-21.
[8]李玉红, 张成友, 王永辉, 等. 反应型相容剂的合成及其对PE/PA6共混物的增容作用[J]. 塑料科技, 2011, 39(12): 49-52.
[9]张静, 何春霞. 不同增容剂对PA6/PE-HD共混物性能的影响[J]. 工程塑料应用, 2012, 40(8): 23-27.
[10]王艺霏, 丁雪佳, 苏昱, 等. HDPE-g-MAH和POE-g-MAH对HDPE/PA6共混物性能的影响[J].化工进展, 2013, 32(9): 2170-2174.
[11]崔同伟, 马秀清. PA6/PE-LD共混物流延薄膜成型过程的理论分析与实验研究[J]. 中国塑料, 2015, 29(12): 62-66.
[12]崔同伟, 马秀清, 陈智勇. 相容剂和配方对PA6/LDPE共混体系性能的影响[J]. 塑料工业, 2015, 43(7): 14-18.
[13]SHI H C, SHI D A, WANG X Y, et al. A facile route for preparing stable co-continuous morphology of LLDPE/PA6 blends with low PA6 content[J]. Polymer, 2010, 51(21): 4958-4968.
[14]KELNAR I, HODAN J, KAPRÁLKOVÁ L, et al. J-integral evaluation of nanoclay-modified HDPE/PA6 microfibrillar composites[J]. Polymer Testing, 2017, 58: 54-59.
[15]GARCÍA-FONTE X, ARES-PERNAS A, CERECEDO C, et al. Influence of phase morphology on the rheology and thermal conductivity of HDPE/PA6 immiscible blends with alumina whiskers[J]. Polymer Testing, 2018, 71: 56-64.
[16]SOUZA A M C, DEMARQUETTE N R. Influence of coalescence and interfacial tension on the morphology of PP/HDPE compatibilized blends[J]. Polymer, 2002, 43(14): 3959-3967.
[17]LE CORROLLER P, FAVIS B D. Effect of viscosity in ternary polymer blends displaying partial wetting phenomena[J]. Polymer, 2011, 52(17): 3827-3834.
[18]BAUDOUINA C, AUHL D, TAO F F, et al. Polymer blend emulsion stabilization using carbon nanotubes interfacial confinement[J]. Polymer, 2011, 52(1): 149-156.
[19]PEÓN J, VEGAJ F, DEL AMO B, et al. Phase morphology and melt viscoelastic properties in blends of ethylene/vinyl acetate copolymer and metallocene-catalysed linear polyethylene[J]. Polymer, 2003, 44(10): 2911-2918.
[20]VIRGILIO N, DESJARDINS P, L'ESPÉRANCE G, et al. In situ measure of interfacial tensions in ternary and quaternary immiscible polymer blends demonstrating partial wetting[J]. Macromolecules, 2009, 42(19): 7518-7529.
[21]VALERAT S, MORITA A T, DEMARQUETTE N R. Study of morphologies of PMMA/PP/PS ternary blends[J]. Macromolecules, 2006, 39(7): 2663-2675.
[22]YIN X Z, TAN Y Q, GAO Y, et al. Viscoelasticity of shell-crosslinked core-shell nanoparticles filled polystyrene melt[J]. Polymer, 2012, 53(18): 3968-3974.
[23]PALIERNEJ F. Linear rheology of viscoelastic emulsions with interfacial tension[J]. Rheologica Acta, 1990, 29(3): 204-214.
[24]BOUSMINA M. Rheology of polymer blends: linear model for viscoelastic emulsions[J]. Rheologica Acta, 1999, 38(1): 73-83.
[25]SHI D A, KE Z, YANG J H, et al. Rheology and morphology of reactively compatibilized PP/PA6 blends[J]. Macromolecules, 2002, 35(21): 8005-8012.
[26]FAHRLÄNDER M, FRIEDRICH C. Rheological properties of polymer blends with sphere-in-sphere morphology[J].Rheologica Acta, 1999, 38(3): 206-213.
[27]SONG Y H, ZENG L B, ZHENG Q. Unique liquid-to-solid transition of carbon filler filled polystyrene melts[J]. Composites Science and Technology, 2017, 147: 39-44.

备注/Memo

备注/Memo:
收稿日期: 2021-12-05。
基金项目: 2020年度常州大学大学生课外创新创业基金项目(ZMF20020132)。
作者简介: 廖华勇(1975—), 男, 湖北宜城人, 博士, 副教授。E-mail: lhy@cczu.edu.cn
更新日期/Last Update: 1900-01-01