[1]汪士凯,何岩峰,郭二鹏,等.多元热流体开发效果模拟及影响因素关联分析[J].常州大学学报(自然科学版),2024,36(03):18-25.[doi:10.3969/j.issn.2095-0411.2024.03.003]
　WANG Shikai,HE Yanfeng,GUO Erpeng,et al.Simulation of multi-component thermal fluid development effect and correlation analysis of influencing factors[J].Journal of Changzhou University(Natural Science Edition),2024,36(03):18-25.[doi:10.3969/j.issn.2095-0411.2024.03.003]
点击复制

多元热流体开发效果模拟及影响因素关联分析()
分享到：

常州大学学报(自然科学版)[ISSN:2095-0411/CN:32-1822/N]

卷:
第36卷
期数:
2024年03期
页码:
18-25
栏目:
石油与天然气工程
出版日期:
2024-05-28

文章信息/Info

Title:
Simulation of multi-component thermal fluid development effect and correlation analysis of influencing factors
文章编号:
2095-0411(2024)03-0018-08
作者:
汪士凯1;  何岩峰1;  郭二鹏2;  窦祥骥1;  吴小军1;  黄志强1
1.常州大学 石油与天然气工程学院, 江苏 常州 213164; 2.中国石油勘探开发研究院, 北京 100083
Author(s):
WANG Shikai1;  HE Yanfeng1;  GUO Erpeng2;  DOU Xiangji1;  WU Xiaojun1;  HUANG Zhiqiang1
1.School of Petroleum and Natural Gas Engineering, Changzhou University, Changzhou 213164, China; 2.Research Institute of Petroleum Exploration and Development, CNPC, Beijing 100083, China
关键词:
多元热流体;  数值模拟;  主控因素;  工艺参数
Keywords:
multi-component thermal fluid;  numerical simulation;  main controlling factors;  process parameters
分类号:
TE 3
DOI:
10.3969/j.issn.2095-0411.2024.03.003
文献标志码:
A
摘要:
多元热流体在稠油开发中得到了广泛的应用,但是由于其增油机理较为复杂,因此对其注入参数进行合理设计较为困难。利用数值模拟技术分析了多元热流体开发与蒸汽吞吐的作用效果差异,印证多元热流体增油机理的同时,研究了不同注入温度、注入速率以及焖井时间条件下多元热流体对开发效果的影响。结果表明,这些注入参数存在一个最佳的数值范围。进一步结合现场多元热流体应用井的实际生产数据对其开发效果的主控因素进行分析,得到注入强度、注入速度和注入温度是影响多元热流体开发效果的主要因素。研究结果为多元热流体开发工艺参数设计提供了指导。
Abstract:
Multi-component thermal fluid had been widely used in heavy oil development, but due to their complex oil increasing mechanism, it was difficult to design their injection parameters reasonably. Numerical simulation technology was used to analyze the differences in the effects of multi-component thermal fluid development and steam huff and puff, confirming the mechanism of multi-component thermal fluid improving oil recovery. At the same time, the influence of multi-component thermal fluid on development under different injection temperature, injection rate, and soaking time conditions was studied. The result showed that there was an optimal numerical range for these injection parameters. Further combining the actual production data of on-site multi-component thermal fluid application wells, the main controlling factors of their development effectiveness were analyzed, and it was found that injection intensity, injection speed, and injection temperature are the main factors affecting the development effectiveness of multi-component thermal fluid. This provides guidance for designing process parameters for multi-component thermal fluid development.

参考文献/References:

[1] YU X N, LI X P, WANG S L, et al. A multicomponent thermal fluid numerical simulation method considering formation damage[J]. Geofluids, 2021, 2021: 8845896.
[2] HOU J, WEI B, DU Q J, et al. Production prediction of cyclic multi-thermal fluid stimulation in a horizontal well[J]. Journal of Petroleum Science and Engineering, 2016, 146: 949-958.
[3] 葛涛涛, 庞占喜, 罗成栋, 等. 海上稠油油藏水平井多元热流体驱物理模拟实验研究[J]. 油气地质与采收率, 2019, 26(4): 62-69.
[4] 梅伟, 郑立朝, 张建亮, 等. 海上稠油油田多元热流体吞吐增产机理研究与实践[J]. 当代化工, 2024, 53(3): 650-654, 659.
[5] 张明龙. 普通稠油油藏多元热流体驱提高采收率实验研究[J]. 西安石油大学学报(自然科学版), 2023, 38(6): 63-67.
[6] GUO M Z, LUN Z M, ZHOU B, et al. Experimental study on water-rock interaction characteristics of unconsolidated sandstone during CO2 multicomponent thermal fluid injection[J]. Geofluids, 2023, 2023: 2197400.
[7] SRIVASTAVA R K, HUANG S S, DONG M Z. Comparative effectiveness of CO2, produced gas, and flue gas for enhanced heavy-oil recovery[J]. SPE Reservoir Evaluation & Engineering, 1999, 2(3): 238-247.
[8] LIU Y G, ZOU J, MENG X H, et al. Treatment technology of steam breakthrough for offshore heavy oil reservoirs developed by huff and puff with multi-component thermal fluid[C]//Kuala Lumpur: SPE Asia Pacific Enhanced Oil Recovery Conference, 2015.
[9] REZAEI M, SHADIZADEH S R, VOSOUGHI M, et al. An experimental investigation of sequential CO2 and N2 gas injection as a new EOR method[J]. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2014, 36(17): 1938-1948.
[10] 彭世强, 郑伟. 海上稠油多元热流体吞吐产能影响因素研究: 以渤海N油田为例[J]. 石油地质与工程, 2020, 34(3): 67-70.
[11] 冯祥, 宫汝祥, 李敬松. 多元热流体多轮次吞吐周期注入强度优化方法[J]. 油气藏评价与开发, 2019, 9(1): 64-67, 84.
[12] 张启龙, 韩耀图, 陈毅, 等. 海上多元热流体参数优化及选井原则研究[J]. 天然气与石油, 2020, 38(4): 71-77.
[13] QIN J H, ZHANG J, ZHU S J, et al. Multi-component thermal fluid injection performance in recovery of heavy oil reservoirs[J]. Frontiers in Energy Research, 2021, 9: 803540.
[14] 梁丹, 冯国智, 曾祥林, 等. 渤海稠油油田多元热流体吞吐数值模拟研究[J]. 石油地质与工程, 2013, 27(6): 130-132, 153.
[15] 杨兵, 李敬松, 董铭. 水平井多元热流体吞吐影响因素关联分析及优化研究[J]. 油气藏评价与开发, 2017, 7(2): 53-57, 82.
[16] 孙永涛, 李兆敏, 王壮壮, 等. 渤海稠油油藏多元热流体开发全过程参数优化[J]. 科学技术与工程, 2020, 20(25): 10255-10261.
[17] DONG X H, LIU H Q, HOU J R, et al. Multi-thermal fluid assisted gravity drainage process: a new improved-oil-recovery technique for thick heavy oil reservoir[J]. Journal of Petroleum Science and Engineering, 2015, 133: 1-11.
[18] 白佳佳, 顾添帅, 司双虎, 等. 高盐稠油油藏聚合物驱提高采收率研究[J]. 常州大学学报(自然科学版), 2023, 35(5): 60-66.
[19] HUANG S J, CAO M, CHENG L S. Experimental study on the mechanism of enhanced oil recovery by multi-thermal fluid in offshore heavy oil[J]. International Journal of Heat and Mass Transfer, 2018, 122: 1074-1084.
[20] 刘楠楠, 戚恒辰, 徐慧, 等. 油层厚度对井模型下蒸汽辅助重力驱稠油开发的影响[J]. 常州大学学报(自然科学版), 2023, 35(6): 82-89.
[21] HU S B, GUO L L, LIU Y J. The effects of multi-component thermal fluids on the viscosity of offshore heavy oil[J]. Petroleum Science and Technology, 2014, 32(20): 2458-2465.
[22] 石飞, 常涛, 吴君达, 等. 海上多元热流体吞吐合理注采参数优化研究[J]. 石油化工应用, 2023, 42(6): 49-52.

相似文献/References:

[1]邵 悦,赵会军,王小兵.水力旋流器油水分离数值模拟与实验研究[J].常州大学学报(自然科学版),2013,(02):51.[doi:10.3969/j.issn.2095-0411.2013.02.013]
　SHAO Yue,ZHAO Hui jun,WANG Xiao bing.Numerical Simulation and Experimental Investigation on Oil Water Separation within Liquid Liquid Hydrocyclone[J].Journal of Changzhou University(Natural Science Edition),2013,(03):51.[doi:10.3969/j.issn.2095-0411.2013.02.013]
[2]蒋展志,刘雪东,李 岩,等.底部对数螺线挡板对搅拌釜流场特性影响的数值模拟[J].常州大学学报(自然科学版),2013,(02):67.[doi:10.3969/j.issn.2095-0411.2013.02.017]
　JIANG Zhan zhi,LIU Xue dong,LI Yan,et al.Numerical Simulation on Effect of Flow Characteristics with Bottom Logarithmic Spiral Baffle in Stirred Tank[J].Journal of Changzhou University(Natural Science Edition),2013,(03):67.[doi:10.3969/j.issn.2095-0411.2013.02.017]
[3]张牛牛,薛?? 敏.室内污染物排放的数值模拟分析[J].常州大学学报(自然科学版),2009,(02):27.
　ZHANG Niu- niu,XU E min.Numerical Simulation and Analysis of Indoor Pollutant[J].Journal of Changzhou University(Natural Science Edition),2009,(03):27.
[4]陶进峰,徐学慧.平焰燃烧三维热态速度场的数值模拟[J].常州大学学报(自然科学版),2012,(01):33.
　TAO Jin-feng,XU Xue-hui.Numerical Simulation on 3D Thermal SpeedField in Flat-Flame Burning[J].Journal of Changzhou University(Natural Science Edition),2012,(03):33.
[5]刘 佳.一类捕食模型的定性分析[J].常州大学学报(自然科学版),2012,(02):76.
　LIU Jia.Qualitative Analysis of a Predator-Prey Model[J].Journal of Changzhou University(Natural Science Edition),2012,(03):76.
[6]蒋绿林,董应伟,周 其.置换式诱导器系统空调房间气流组织的数值模拟[J].常州大学学报(自然科学版),2012,(03):44.
　JIANG Lu-lin,DONG Ying-wei,ZHOU Qi.Numerical Simulation Indoor Airflow of Displacement Idu Ventilation System[J].Journal of Changzhou University(Natural Science Edition),2012,(03):44.
[7]周 宁,崔 伟,潘 东.罐区重质气体泄漏扩散的数值模拟分析[J].常州大学学报(自然科学版),2013,(03):28.[doi:10.3969/j.issn.2095-0411.2013.03.008]
　ZHOU Ning,CUI Wei,PAN Dong.Numerical Simulation Analysis for Heavy Gas Leakage and Diffusion of Tank Farm[J].Journal of Changzhou University(Natural Science Edition),2013,(03):28.[doi:10.3969/j.issn.2095-0411.2013.03.008]
[8]朱 莹,王树立,史小军.基于 P HO EN ICS 的原油顺序输送管道混油数值模拟 3[J].常州大学学报(自然科学版),2008,(01):40.
　ZHU Ying,WAN G Shu - li,S H I Xiao - j un.PHOENICS - Based Numerical Study for Contamination in Batch Pipeline of Crude Oil[J].Journal of Changzhou University(Natural Science Edition),2008,(03):40.
[9]张青松,赵会军,赵书华.埋地热油管道土壤温度场PHOENICS 数值模拟[J].常州大学学报(自然科学版),2007,(04):53.
　ZHANG Qing- song,ZHAO Hui- jun,ZHAO Shu- hua.PHOENICS- Based Numerical Simulation for Soil Temperature Field Underground Heated Pipeline[J].Journal of Changzhou University(Natural Science Edition),2007,(03):53.
[10]蒋绿林,王昌领,姜钦青,等.室内自然通风环境的数值预测与评价[J].常州大学学报(自然科学版),2016,(03):54.[doi:10.3969/j.issn.2095-0411.2016.03.011]
　JIANG Lyulin,WANG Changling,JIANG Qinqing,et al.Numerical Prediction and Evaluation of the Natural Ventilation of Indoor Environment[J].Journal of Changzhou University(Natural Science Edition),2016,(03):54.[doi:10.3969/j.issn.2095-0411.2016.03.011]

备注/Memo

备注/Memo:
收稿日期: 2024-03-09。
基金项目: 中国石油-常州大学创新联合体资助项目(2021DQ06)。
作者简介: 汪士凯(1991—), 男, 湖北孝感人, 博士, 讲师。E-mail: wsk@cczu.edu.cn
更新日期/Last Update: 1900-01-01