[1]朱庆杰,任 瑞,贾海波,等.基于ADINA的多孔介质流固耦合分析[J].常州大学学报(自然科学版),2015,(01):81-85.[doi:10.3969/ j.issn.2095-0411.2015.01.016]
　ZHU Qing-jie,REN Rui,JIA Hai-bo,et al.Coupling Analysis of Fluid Structure Interaction in Porous Media Based on ADINA[J].Journal of Changzhou University(Natural Science Edition),2015,(01):81-85.[doi:10.3969/ j.issn.2095-0411.2015.01.016]
点击复制

基于ADINA的多孔介质流固耦合分析()
分享到：

常州大学学报(自然科学版)[ISSN:2095-0411/CN:32-1822/N]

卷:
期数:
2015年01期
页码:
81-85
栏目:
出版日期:
2015-01-25

文章信息/Info

Title:
Coupling Analysis of Fluid Structure Interaction in Porous Media Based on ADINA
作者:
朱庆杰; 任 瑞; 贾海波; 徐伟彬; 张 涛
常州大学 石油工程学院,江苏 常州 213016
Author(s):
ZHU Qing-jie; REN Rui; JIA Hai-bo; XU Wei-bin; ZHANG Tao
School of Petroleum Engineering,Changzhou University,Changzhou 213016,China
关键词:
多孔介质;  流固耦合;  有限元;  ADINA
Keywords:
porous media;  fluid structure interaction;  finite element;  ADINA
分类号:
TE 992.2
DOI:
10.3969/ j.issn.2095-0411.2015.01.016
文献标志码:
A
摘要:
基于流固耦合的研究理论,根据多孔介质(过滤板)中流体与结构之间的耦合关系,以有限元分析软件ADINA为平台,建立多孔介质(过滤板)的三维有限元模型,计算得到多孔介质(过滤板)在流固耦合作用下应力分布及变形情况。计算结果表明流固耦合作用对多孔介质(过滤板)变形破坏有重要的影响。针对计算结果,为过滤板的设计提出几点建议。
Abstract:
Based on the research of fluid structure interaction theory, according to the coupling relationship between structure and fluid in porous media, taking ADINA finite element analysis software as the platform, three-dimensional finite element model of porous media is establised. The stress distribution and deformation condition of porous media are calculated. The results show that the fluid structure interaction has an important influence on deformation anddamage of the filter plate. Finally, some advice for the design of the filter plate is proposed.

参考文献/References:

[1]薛世峰,仝兴华,岳伯谦,等.地下流固耦合理论的研究进展及应用[J].石油大学学报(自然科学版),2000,24(2):109-114.
[2]李静,祁万军.油田污水处理研究[J].化工装备技术,2010,31(4):46-49.
[3]Lihan Huang,Michael T Morrissey.Finite element analysis as a tool for crossflow membrane filter simulation[J].Journal of Membrane Science,1999,155(1):19-31.
[4]Richardson C J,Nassehi V.Finite element modelling of concentration profiles in flow domains with curved porous boundaries[J].Chemical Engineering Science,2003,58(12):2491-2503.
[5]Nassehi V,Hanspal N S,Waghode A N,et al.Finite-element modelling of combined free/porous flow regimes: simulation of flow through pleated cartridge filters[J].Chemical Engineering Science,2005,60(4):995-1006.
[6]Elbitar T,Gemeal A.Finite element analysis of deep drawing and hole flanging processing of an oil filter cover[J].Int J Mater Form,2008,1(Suppl 1):125-128.
[7]杨文明,宗荣珍.基于ANSYS的配料仓滤网有限元分析[J].机械研究与应用,2009(1):36-38.
[8]刘令,肖剑,黄龙,等.熔融结晶洗涤塔过滤板的有限元分析[J].化工机械,2012,39(5): 602-621.
[9]邢景棠,周盛,崔尔杰.流固耦合力学概述[J].力学进展,1997,27(1):19-38.
[10]岳戈,陈权.ADINA应用基础与实例讲解[M].北京:人民交通出版社,2008:54.
[11]岳戈,梁宇白,陈晨,等.ADINA流体与流固耦合功能的高级应用[M].北京:人民交通出版社,2010:57.
[12]朱庆杰,苏幼坡,陈艳华.城市防灾技术-ADINA-M建模与IDRISI防灾决策[M].北京:中国科学技术出版社,2007:50.

相似文献/References:

[1]胡炳涛,朱荣涛,李超永,等.弯管冲蚀失效模拟研究及影响因素分析[J].常州大学学报(自然科学版),2019,31(02):29.[doi:10.3969/j.issn.2095-0411.2019.02.004]
　HU Bingtao,ZHU Rongtao,LI Chaoyong,et al.Simulation Study on Erosion Failure of Elbow and Analysis of Influencing Factors[J].Journal of Changzhou University(Natural Science Edition),2019,31(01):29.[doi:10.3969/j.issn.2095-0411.2019.02.004]
[2]郭文敏,万永华,赵炫皓.多孔介质分形维数的两相渗吸数学模型研究[J].常州大学学报(自然科学版),2020,32(01):85.[doi:10.3969/j.issn.2095-0411.2020.01.013]
　GUO Wenmin,WAN Yonghua,ZHAO Xuanhao.Study on Two-Phase Permeation Mathematical Model Considering Fractal Dimension of Porous Media[J].Journal of Changzhou University(Natural Science Edition),2020,32(01):85.[doi:10.3969/j.issn.2095-0411.2020.01.013]

备注/Memo

备注/Memo:
作者简介:朱庆杰(1966-),男,河北宁晋人,教授,主要从事城市地理信息系统等方面的研究。
更新日期/Last Update: 2015-01-25