[1]朱伟,赵会军,齐玉成,等.超疏水材料在水力旋流器上的应用实验研究[J].常州大学学报(自然科学版),2016,(04):59-63.[doi:10.3969/j.issn.2095-0411.2016.04.011]
　ZHU Wei,ZHAO Huijun,QI Yucheng,et al.Experimental Study on the Application of Super Hydrophobic Material in the Hydrocyclone[J].Journal of Changzhou University(Natural Science Edition),2016,(04):59-63.[doi:10.3969/j.issn.2095-0411.2016.04.011]
点击复制

超疏水材料在水力旋流器上的应用实验研究()
分享到：

常州大学学报(自然科学版)[ISSN:2095-0411/CN:32-1822/N]

卷:
期数:
2016年04期
页码:
59-63
栏目:
材料科学与工程
出版日期:
2016-07-30

文章信息/Info

Title:
Experimental Study on the Application of Super Hydrophobic Material in the Hydrocyclone
作者:
朱伟1; 赵会军2; 齐玉成1; 朱宇轩1
1.常州大学 石油工程学院,江苏 常州 213016; 2.江苏省油气储运技术重点实验室(常州大学),江苏 常州 213016
Author(s):
ZHU Wei1; ZHAO Huijun2;  QI Yucheng1;  ZHU Yuxuan1
1. School of Petroleum Engineering,Changzhou University,Changzhou 213016,China; 2. Jiangsu Key Laboratory of Oil & Gas Storage and Transportation Technology,Changzhou University, Changzhou 213016,China
关键词:
超疏水材料;  水力旋流器;  分离效率;  溢流管
Keywords:
super hydrophobic material;  hydrocyclone;  separation efficiency;  overflow pipe
分类号:
TQ 316.334
DOI:
10.3969/j.issn.2095-0411.2016.04.011
文献标志码:
A
摘要:
利用正十二硫醇对经过酸蚀以后的铜网进行表面修饰,制成水接触角大于140°,滚动角5.6°,甲苯接触角约为5°的超疏水材料。将其用于替代旋流器溢流管在旋流腔内的材料,降低短路流与循环流对分离效率的影响。通过室内建立有效的实验装置对分离效果进行实验,验证了超疏水材料在旋流器上的应用是可行的,采用300目铜网改进的溢流管结构能把分离效率从为使用的84.8%提高至88.9%。
Abstract:
1-Dodecanethiol was used to modify the surface of copper mesh after acid etching. The new type of super hydrophobic material was made, whose contact angle was more than 140°, rolling angle was 5.6°, and the toluene angle was close to 5°. The material is used to replace the overflow pipe in the swirl chamber, reduce the effect of the short circuit and the circulating flow on the separation efficiency. The separation effect is quantified by the effective experimental apparatus. It is verified that the application of the super hydrophobic material on the cyclone is feasible. The improved overflow pipe structure with 300 mesh copper mesh can improve the separation efficiency from 84.8% to 88.9%.

参考文献/References:

[1]邵悦,赵会军,王小兵.水力旋流器油水分离数值模拟与实验研究[J].常州大学学报(自然科学版),2013,25(2):51-55.
[2]TUTEJA A, CHOI W, MABTY A. Designing superoleophobic surfaces[J].Science,2007, 318:1618-1622.
[3]刘明芝.超疏水表面制备及其在海水中的腐蚀行为研究[D].南昌:南昌航空大学,2012.
[4]倪玲英.溢流口直径多原油预分水旋流器性能的影响[J].石油化工设备,2009,29(2):8-9.
[5]GUO W, ZHANG Q, XIAO H B. Cu mesh’s super-hydrophobic and oleophobic properties with variations in gravitational pressure and surface components for oil/water separation applications[J]. Applied Surface Science,2014,314:408-414.
[6]周继根. 超双疏表面制备及其润湿性研究[D]. 青岛:青岛理工大学,2010.
[7]李玉星,冯叔初,李安星,等.水力旋流器压降及压力分布特性的数值模拟[J].流体机械,2002,30(10):15- 19.
[8]CRIK C R, GIBBINS J A, PARKIN I P. Superhydrophobic polymer-coated copper-mesh membranes for highly efficient oil-water separation[J].Joumal of Materials Chemistry A,2013,19(1):5943-5948.

备注/Memo

备注/Memo:
收稿日期:2016-01-05。基金项目:江苏省自然科学基金资助(BK20150269)。作者简介:朱伟(1990—),男,江苏苏州人,硕士生。通讯联系人:赵会军(1965—),E-mail:zhj@cczu.edu.cn
更新日期/Last Update: 2016-08-30