[1]刘鑫,邢书明,武彤,等.液态模锻2A50特种车辆轮盘冷隔缺陷的成因与防治[J].常州大学学报(自然科学版),2021,33(06):17-21.[doi:10.3969/j.issn.2095-0411.2021.06.003]
　LIU Xin,XING Shuming,WU Tong,et al.Causes and Prevention of Cold Shut Defects in 2A50 Special Vehicle Wheels Produced by Molten Metal Die Forging(MMDF)Process[J].Journal of Changzhou University(Natural Science Edition),2021,33(06):17-21.[doi:10.3969/j.issn.2095-0411.2021.06.003]
点击复制

液态模锻2A50特种车辆轮盘冷隔缺陷的成因与防治()
分享到：

常州大学学报(自然科学版)[ISSN:2095-0411/CN:32-1822/N]

卷:
第33卷
期数:
2021年06期
页码:
17-21
栏目:
材料科学与工程
出版日期:
2021-11-28

文章信息/Info

Title:
Causes and Prevention of Cold Shut Defects in 2A50 Special Vehicle Wheels Produced by Molten Metal Die Forging(MMDF)Process
文章编号:
2095-0411(2021)06-0017-05
作者:
刘鑫1; 2; 邢书明1; 武彤1; 王永生2
(1.北京交通大学机械与电子控制工程学院,北京100044;2.北方车辆集团有限公司,北京100072)
Author(s):
LIU Xin1; 2 ;  XING Shuming1;  WU Tong1;  WANG Yongsheng2
(1. School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044, China; 2. Northern Vehicle Group Co., Ltd., Beijing 100072, China)
关键词:
2A50铝合金;  液态模锻;  负重轮;  冷隔
Keywords:
2A50 aluminum alloy;  liquid die forging;  loading wheel;  cold shut
分类号:
TG 316.3
DOI:
10.3969/j.issn.2095-0411.2021.06.003
文献标志码:
A
摘要:
对液态模锻2A50铝合金负重轮轮盘的冷隔产生进行了分析, 表明其起源于轮缘周表面晶界处, 并且向内部扩展。冷隔产生的主要原因是铝液紊乱, 波动至下模外套直壁上, 下压过程中, 铝液难以冲破这层表面层, 于是形成冷隔。通过缓冲滤渣漏斗工装、适当调节导流槽铝液流速、增加捞渣工序等措施, 减少了铝液表面氧化膜的数量, 使铝液平稳填充, 杜绝铝液波动, 从而消除冷隔的产生。
Abstract:
The causes of cold shut of 2A50 aluminum alloy wheel hub produced by the molten metal die forging process, MMDF for short, were analyzed. The result shows that the cold shut originates from the grain boundary of the wheel flange surface and extends to the inside. The main reason for forming the cold shut is that the aluminum liquid fluctuates to the lower mold wall due to disorder. During the pressing process, it is difficult for the aluminum liquid to break through this surface layer, and thus a cold shut is formed. By buffering the filter residue funnel tooling, appropriately adjusting the flow rate of the aluminum liquid in the diversion tank, and increasing the oxides removal process, the number of oxide films on the surface of the aluminum liquid is reduced, the aluminum liquid is filled smoothly and its fluctuation is eradicated, and thus the generation of cold shut is eliminated.

参考文献/References:

[1]罗守靖, 何绍元, 王尔德, 等. 钢质液态模锻[M]. 哈尔滨: 哈尔滨工业大学出版社, 1990.
[2]李顺, 李宏伟, 张新, 等. 高性能铝合金结构件液态模锻技术研究[J]. 新技术新工艺, 2015(6): 129-134.
[3]王长顺, 李宏伟, 陈利华, 等. 特种车辆新型高强韧铝合金负重轮液态模锻工艺成型研究[J]. 新技术新工艺, 2013(7): 88-90.
[4]赵恒义, 周天西, 袁燕. 液态模锻工艺及发展应用现状[J]. 热加工工艺, 2000, 29(2): 45-46, 57.
[5]洪慎章, 曾振鹏. 铝合金零件半固态模锻的应用及发展[J]. 锻压技术, 2004, 29(4): 5-7.
[6]MURALI S,YONG M S. Liquid forging of thin Al-Si structures[J]. Journal of Materials Processing Technology, 2010, 210(10): 1276-1281.
[7]YIN F, WANG G X, HONG S Z, et al. Technological study of liquid die forging for the aluminum alloy connecting rod of an air compressor[J]. Journal of Materials Processing Technology, 2003, 139(1/2/3): 462-464.
[8]LUO S J, HE S Y, MA S M. The optimum selection of technological parameters for liquid forging of pumic-aluminum composite materials[J]. Journal of Materials Processing Technology, 1993, 39(1/2): 145-151.
[9]胡茂良, 赵密, 吉泽升, 等. 汽车空调器摇盘挤压铸造模具设计及工艺研究[J]. 特种铸造及有色合金, 2005, 25(3): 155-157, 126.
[10]邢书明, 闫光远, 鲍培玮, 等. 挤压铸造高品质大型结构件[J]. 特种铸造及有色合金, 2021, 41(2): 133-138.
[11]ZHAO Z, CHEN Q, HU C K, et al. Near-liquidus forging, partial remelting and thixoforging of an AZ91D + Y magnesium alloy[J]. Journal of Alloys and Compounds, 2009, 485(1/2): 627-636.
[12]刘六法, 张彩平, 翟春泉. 铝合金挤压铸件典型缺陷的预防和控制[J]. 特种铸造及有色合金, 2008, 28(6): 442-444, 407.

相似文献/References:

[1]邢书明,王卓群,吴 毅,等.梯度石墨铸铁玻璃模具液态模锻模拟与仿真[J].常州大学学报(自然科学版),2023,35(02):1.[doi:10.3969/j.issn.2095-0411.2023.02.001 ]
　XING Shuming,WANG Zhuoqun,WU Yi,et al.Squeeze casting simulation of gradient graphite cast iron glass mold based on procast[J].Journal of Changzhou University(Natural Science Edition),2023,35(06):1.[doi:10.3969/j.issn.2095-0411.2023.02.001 ]
[2]李婷芳,鲍培玮,邢书明,等.钴铬钼合金股骨柄液态模锻的数值模拟[J].常州大学学报(自然科学版),2023,35(02):10.[doi:10.3969/j.issn.2095-0411.2023.02.002 ]
　LI Tingfang,BAO Peiwei,XING Shuming,et al.Numerical simulation of melted metal die forging of CoCrMo alloy femoral stem[J].Journal of Changzhou University(Natural Science Edition),2023,35(06):10.[doi:10.3969/j.issn.2095-0411.2023.02.002 ]
[3]邢书明,石洪伟,江艳星,等.整体式副车架液态模锻及其性能[J].常州大学学报(自然科学版),2024,36(01):1.[doi:10.3969/j.issn.2095-0411.2024.01.001]
　XING Shuming,SHI Hongwei,JIANG Yanxing,et al.Molten metal die forging of closed subframe and its performance research[J].Journal of Changzhou University(Natural Science Edition),2024,36(06):1.[doi:10.3969/j.issn.2095-0411.2024.01.001]

备注/Memo

备注/Memo:
收稿日期:2021-06-14。
作者简介:刘鑫(1989—), 男, 北京人, 博士, 工程师。通信联系人: 邢书明(1962—),E-mail: smxing@bjtu.edu.cn
更新日期/Last Update: 1900-01-01