[1]胡爱萍,沈惠平.用高副低代法快速求解偏心轮凸轮机构最大压力角[J].常州大学学报(自然科学版),2002,(02):1-3.
　HU Ai-ping,SHEN Hui -ping.Evaluating Rapidly Maximum Pressure Angle Value of Of f set Cam Mechanisms by Using Replacement of High Pair with Low Pair[J].Journal of Changzhou University(Natural Science Edition),2002,(02):1-3.
点击复制

用高副低代法快速求解偏心轮凸轮机构最大压力角()
分享到：

常州大学学报(自然科学版)[ISSN:2095-0411/CN:32-1822/N]

卷:
期数:
2002年02期
页码:
1-3
栏目:
出版日期:
2002-06-25

文章信息/Info

Title:
Evaluating Rapidly Maximum Pressure Angle Value of Of f set Cam Mechanisms by Using Replacement of High Pair with Low Pair
作者:
胡爱萍;  沈惠平
江苏石油化工学院机械工程系, 江苏 常州 213016
Author(s):
HU Ai-ping ;  SHEN Hui -ping
Department of Mechanical Engineering , Jiangsu Institute of Petrochemical Technology , Changzhou 213016 , China
关键词:
凸轮机构; 压力角; 高副低代
Keywords:
cam mechanism ; pressure angle ; replacement of high pair wi th low pair
分类号:
TH 132.47
文献标志码:
A
摘要:
求解凸轮机构最大压力角, 在凸轮机构的分析与设计中具有重要而实用的意义。由于凸轮机构压力角是凸轮机构位置的 函数, 传统的求法较为复杂, 而利用高副低代法, 可快速求解一类凸轮机构偏心轮凸轮机构最大压力角。该方法具有较好 的工程实用价值和教学应用意义。
Abstract:
Evaluating maximum pressure angle (MPA)value of cam mechanism is significant and has practical applications in analyzing and designing cam mechanism .Because the pressure ang le of cam mechanism is the function of the position of cam mechanism , the evaluating process of MPA is usually mo re complicated .The paper presents a method for ev aluating rapidly MPA of one type of cam mechanisms -off set cam mechanisms by using replacement of hig h pair with low pair .Compared w ith the t raditional method fo r solving MPA , this method is simple and easy .It not only can determine directly the position and value of MPA on the kinetic mechanism scheme , but also can adjust conveniently the geometric parameters of cam mechanisms acco rding to the analy tical formula of MPA .Therefore the method is of better value in engineering and teaching .

参考文献/References:

[1] 郑文伟, 吴克坚.机械原理[M] .第七版.北京:高等教育 出版社, 1997.
[2] 孙桓, 陈作模.机械原理[M] .第六版.北京:高等教育出 版社, 2001.
[3] 王知行, 刘廷荣.机械原理[M] .北京:高等教育出版社, 2000.
[4] 沈惠平.关于平面凸轮机构特征圆的概念及其运动转角的度量 表示方法[J] .江苏石油化工学院学报, 1993 , 5 (2):35 - 40.

相似文献/References:

[1]张慧峰,董怀荣,裴峻峰.凸轮机构3 缸单作用恒流量往复泵特性分析[J].常州大学学报(自然科学版),2002,(02):4.
　ZHANG Hui -feng,DONG Huai -rong,PEI Jun -feng.Per formance Analysis of Triplex Single Constant Flow Reciprocating Pump with the Cam -drive Mechanism[J].Journal of Changzhou University(Natural Science Edition),2002,(02):4.
[2]董怀荣,张慧峰,裴峻峰.凸轮机构往复泵与曲柄连杆机构往复泵 性能对比分析[J].常州大学学报(自然科学版),2002,(04):10.
　DONG Huai -rong,ZHANG Hui -feng,PEI Jun -feng.The Correlation Analyses of the Performance between the Cam-drive Mechanism Reciprocating Pump and the Crack -connecting Rod Reciprocating Pump[J].Journal of Changzhou University(Natural Science Edition),2002,(02):10.

备注/Memo

备注/Memo:
作者简介:胡爱萍(1957 -), 女, 浙江长兴人, 副教授, 主要从事机构学及机械设计方面的教学与研究。
更新日期/Last Update: 2002-06-25