[1]董怀荣,张慧峰,裴峻峰.凸轮机构往复泵与曲柄连杆机构往复泵 性能对比分析[J].常州大学学报(自然科学版),2002,(04):10-13.
 DONG Huai -rong,ZHANG Hui -feng,PEI Jun -feng.The Correlation Analyses of the Performance between the Cam-drive Mechanism Reciprocating Pump and the Crack -connecting Rod Reciprocating Pump[J].Journal of Changzhou University(Natural Science Edition),2002,(04):10-13.
点击复制

凸轮机构往复泵与曲柄连杆机构往复泵 性能对比分析()
分享到:

常州大学学报(自然科学版)[ISSN:2095-0411/CN:32-1822/N]

卷:
期数:
2002年04期
页码:
10-13
栏目:
出版日期:
2002-12-25

文章信息/Info

Title:
The Correlation Analyses of the Performance between the Cam-drive Mechanism Reciprocating Pump and the Crack -connecting Rod Reciprocating Pump
作者:
董怀荣1 张慧峰1 裴峻峰2
1.胜利石油管理局钻井工艺研究院, 山东东营257017 ;2.江苏石油化工学院
Author(s):
DONG Huai -rong 1 ZHANG Hui -feng1 PEI Jun -feng2
1 .Drilling Technology Research Institute , Shengli Petroleum Administration , Dongying 257017 , China ; 2 .Jiangsu Institute of Pet rochemical Technology
关键词:
凸轮机构曲柄连杆机构往复泵性能柱塞泵阀
Keywords:
cam -drive mechanism crack -connecting rod mechanism reciprocating pump performance plunger valve of pump
分类号:
TH 321
文献标志码:
A
摘要:
由于动力端采用了特殊廓线的凸轮传动机构取代传统往复泵的曲柄连杆机构, 使得往复泵的性能发生了重要改变。从柱 塞运动规律、动力特性、吸入与排出性能以及泵阀工作特性等方面, 对凸轮机构恒流量往复泵与曲柄连杆机构往复泵的性能进 行了对比分析, 从而得出了这两种往复泵存在的优点与不足, 为在不同场合进一步使用好两种往复泵提供一些理论指导。
Abstract:
The special cam -drive mechanism which has replaced the traditional crack -connecting rod mechanism is used as the power end of the new constant discharge pump , which has greatly changed the performance of the reciprocating pump .In this paper , from the angles of the motion law of piston , dy namic performance , suction and discharge performance , and the work performance of the valve of pump , the author has laid stress on the correlation analyses of the perfo rmance between the cam -drive constant discharge reciprocating pump and the crack -connecting rod reciprocating pump .As a result , the author has draw n some conclusion on the advantages and disadvantages of the two kinds of pumps , which offer some references on the use of the pumps in respective field .

参考文献/References:

[1] 万邦烈, 李继志.石油矿场水力机械[M] .北京:石油工业 出版社, 1990.3 -80.
[2] 黄锡恺, 郑文纬.机械原理[M] .北京:高等教育出版社, 1990.66 -68.
[3] 张慧峰, 董怀荣, 裴俊峰.凸轮机构3 缸单作用恒流量往复泵 特性分析[J] .江苏石油化工学院学报, 2002 , 14 (2):4 - 7.

相似文献/References:

[1]胡爱萍,沈惠平.用高副低代法快速求解偏心轮凸轮机构最大压力角[J].常州大学学报(自然科学版),2002,(02):1.
 HU Ai-ping,SHEN Hui -ping.Evaluating Rapidly Maximum Pressure Angle Value of Of f set Cam Mechanisms by Using Replacement of High Pair with Low Pair[J].Journal of Changzhou University(Natural Science Edition),2002,(04):1.
[2]张慧峰,董怀荣,裴峻峰.凸轮机构3 缸单作用恒流量往复泵特性分析[J].常州大学学报(自然科学版),2002,(02):4.
 ZHANG Hui -feng,DONG Huai -rong,PEI Jun -feng.Per formance Analysis of Triplex Single Constant Flow Reciprocating Pump with the Cam -drive Mechanism[J].Journal of Changzhou University(Natural Science Edition),2002,(04):4.

备注/Memo

备注/Memo:
作者简介:董怀荣(1969 -), 男, 江苏盱眙人, 高级工程师, 从事石油、化工机械的研究与设计工作, 主要研究方 向是流体工程及设备。
更新日期/Last Update: 2002-12-25